Affordable Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder

Buy Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder Product Description:

• Reconditioned Campbell Hausfeld products have a One Year warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from up to 3/8 Inch mild steel
• 230 Volt 50 Amp input
• Use welding rod sizes 1/16 Inch to 1/8 Inch
• Factory Reconditioned.

Product Description

mfr: Campbell Hausfeld Stick Welder. 230V, 225 Amp AC Stick Welder.This item can not be shipped to Puerto Rico and APO/FPO addresses.SOLDERING, WELDING Campbell Hausfeld Air Products>

Customer Reviews

Most helpful customer reviews

8 of 8 people found the following review helpful.
Works Great and no problems
By C. Finley
I purchased a reconditioned model at a deep discount. It works great .. I had previously used other welders both "cracker box Lincoln" and higher end models. Arc welding is mostly dependent on using good electrodes (dry and proper type) and operator skill. Like playing a guitar, if you can weld you can weld on this machine. I added a heavy guage (awg 6) extension cord to extend the range of the welder from the power supply. I would not recommend extending the leads from the welder as they are probably just OK for the length they are (kinda short). Better to get plenty of power to the welder than to extend the leads. I have had little problem with the welder over heating even though I exceeded the duty cycle when welding on larger projects. The over heat shutoff did work though which is a nice feature. Also the welder is not all that heavy so moving it is not a problem and it has rollers for rolling about .. a nice feature.

6 of 6 people found the following review helpful.
Excellent for the price
By C. Gage
If you are looking for an arc welder, this item should get your attention. I work at a golf course with a very limited budget. Since my welder arrived, I have been able to perform several repairs to get equipment back in service. This unit is excellent for the novice or intermediate user. Free shipping, no less!

4 of 4 people found the following review helpful.
great welder. don't let brand fool you. try it, you won't be dissapointed
By Jeffery W. Daniels
i bought this welder new from ebay for 200.00. i was skeptical. to my surprise, this welder stacked up well against my lincoln 225 arc. i actually weld with this one a little easier. i welded 1/4 inch thick square tubing and it works flawlessly. don't let the brand scare. it comes with a 5 year warranty, manual, starter set of welding rods, hand held welding mask, hammer/brush. the other thing i like about this. it has two storage compartments. one on top, for rods, and one behind door,big enough for my welding helmet. i almost bought a new lincoln, but i am very happy with this. try it. you won't be dissappointed

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale Grizzly G8154 Nursery Platform Truck

Buy Grizzly G8154 Nursery Platform Truck

Grizzly G8154 Nursery Platform Truck Product Description:

Product Description

Designed primarily for the nursery industry, this platform truck with extra-large 10" x 3 1/2" pneumatic lug wheels is perfect for just about anything weighing up to 350 lbs. Heavy-gauge grating provides superior strength and support. Tubular steel steering handle delivers plenty of leverage for confident control over a variety of surfaces. 48"L x 24"W x 13"H. Approximate shipping weight 64 lbs.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Panther Nursery Platform Truck
By Virginia M. Walker
First one had to be sent back because of missing parts and damage.Second one came, still had missing parts but since no damage we obtained subsitute parts at Hardware store. Wheels were supposed to fasten on with cotter pins. No holes in axle shaft for cotter pins. I subsituted bolts and secured wheels that way. I also had to subsitute fittings for steering mechanizam because they were not sent.With my modifications the wagon works fine.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons of Grizzly G8030 Overarm High Speed Router

Buy Grizzly G8030 Overarm High Speed Router

Grizzly G8030 Overarm High Speed Router Product Description:

• Head stroke: 5-3/4"
• Motor: 3 H.P., single phase, 220V, TEFC
• Spindle RPM: 20,000
• Spindle stroke: 3-5/8"
• Table size: 24" W x 18" D

Product Description

Make production routing a breeze with this Overarm High Speed Router. Simply attach a template to the bottom of your workpiece and feed against the table-mounted pin. Overhead cutting lets you see your work. Hydraulic head and foot controls speed up your work even more. Includes clamp-on fence for in-line routing and massive tilting cast iron table for greater versatility. FEATURES: • Fence or pin routing • Foot control for spindle movement • Head assembly travels on dovetail ways. SPECIFICATIONS: • Motor: 3 HP, 220V, single-phase, TEFC, 15 Amps, 3450 RPM • Table size: 24" wide x 18" deep • Shielded and permanently lubricated ball-bearings • Power transfer: single flat belt • Spindle speed: 20,000 RPM • Spindle stroke: 3-5/8" • Head stroke: 5-3/4" • Max. distance spindle to table: 9-1/2" • Swing: 19-1/2" • Table tilt: 45° • Overall height: 74" • Overall width: 24" (no fence); 33-1/2" (with fence) • Overall depth: 35" • Approximate shipping weight: 615 lbs. ACCESSORIES INCLUDE: • Tool box • Hex key wrench set • Grease gun • 1/2" collet • 1/4" collet • Spindle wrench set • 3/8" plunge router bit with 1/2" shank • 1/4", 3/8" & 1/2" table pins for pin routing • Stand

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
G8030 Router
By Len
I attempted to purchase from Grizzly direct and got a delivery date of 3 months out here on the east coast; no stock. Purchased via Amazon and it shipped from West coast and got it within 10 days! Exactly what I expected for the dollars paid out. Obvious,but worth stating, most important to fully understand manual prior to running, operating pneumatic head, raising and lowering of head must be done with spindle turning, router running, or belt will not slide on spindle and interfere with housing! 3 HP motor is low HP but sufficient for our use..like most high end Taiwanese tools fundamentals are there but....once again, you get what you pay for...Guard design is actually good..lifting the unit onto the stand needs to be planned...

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discounted Grizzly G8027 1 HP Dust Collector

Buy Grizzly G8027 1 HP Dust Collector

Grizzly G8027 1 HP Dust Collector Product Description:

Product Description

A great little workhorse at an incredible price! This is a great machine for sanders, router tables, shapers, and other work. It's also very portable, so you can take it to the job site where it can handle the big jobs a regular shop vacuum can't handle.• Motor: 1 HP, 110V, single phase • Motor Amp Draw: 8A • Number of 4" Intake Holes: 1 • Portable Base Size: 15" x 25-1/2" • Height (With bags inflated): 63" • Bag size (diameter x depth): 14-1/2" x 23" (2) • Powder coated paint • Bag filtration: 30 Micron • Bag Capacity: 2 Cubic Feet • Impeller: 9", Balanced Steel, Radial Fin • Air Suction Capacity: 500 CFM • Static Pressure: 2.76" • Approx. Shipping Weight: 67 lbs.

Customer Reviews

Most helpful customer reviews

41 of 41 people found the following review helpful.
Description is right - nice little dust collector
By Patrick
Have it. Had it direct connected to a table saw at first and it was fine. Now run two branch lines and two blast gates to have it pull from the table saw and jointer and it's still fine. Just pull from one machine at a time.No, it doesn't have the ooomph (suction) that larger machines have, but the price/performance ratio is pretty good.

39 of 39 people found the following review helpful.
Great for a small shop
By M. Haddad
If you have a small shop, this dust collector is more than you need. You can connect it to multiple machines (with blast gates, of course) and receive excellent results. A great dust collector for a one man shop.

23 of 23 people found the following review helpful.
Pretty Good thus far
By Michael Janowiak
I just bought this machine. Has about 25% more power then my craftsman 5hp shop vac. So far it pulls just about all the dust I can throw at it from my table saw and miter saw which is notorious for spraying dust everywhere.Not as loud as my shopvac and much smoother at pulling in the dust, plus as the bag fills up it still pulls in consistent pressure whereas my shop vac even with a drywall bag still clogs up. I haven't used any other collectors but this one is good for individuals who have a small shop.I wasn't crazy about the way its put together. When the instructions say its from China...clearly from the bolts and assembly its definitely made in China. It is very solid after construction but we'll see how long it holds up with vibration and dust etc.

See all 8 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Get the Best Price for Grizzly G7910 Hand Held Edge Bander

Buy Grizzly G7910 Hand Held Edge Bander

Grizzly G7910 Hand Held Edge Bander Product Description:

• 2 temperature settings 572 Degrees F, 977 Degrees F with hot air cowling
• Double insulated 1,500 W
• Max banding width 2"

Product Description

This portable edge bander is the perfect answer for shops doing custom and on site work. Bands straight and shaped pieces and sets up in minutes. Adjustable clamping pressure ensures precision work and stability. For use with pre-glued PVC, melamine and wood veneer.

Customer Reviews

Most helpful customer reviews

10 of 10 people found the following review helpful.
complex but effective
By James Kehoe
Very nice tool for applying preglued edge banding. I couldn't afford $35,000 for an entry level gluepot edgebander for my cabinet shop at start up 8 months ago. And I didnt want to use the trusty old iron for all my banding.I only have 4 small concerns with it.It is kind of complex to set up, but once you do, adjusting from 23/32 to 3/4 inch wide panels are relatively easy.It sometimes does not do a good job sticking the first inch of banding and sometimes the last inch on a panel. You need to have a hot clothes iron laying around to make sure the it's really down. I think it may be a skill problem on my part that a few hundred feet more edgebanding experience may improve.It is also really easy to burn the wood if you don't keep it moving. One thing I like is that the heat gun has a sheet metal duck bill that directs the hot air directly between the glue and the panels edge where they meet. You just need to keep the thing moving at a pretty good clip.It seems really fragile. I always lay it directly on the floor, never on a bench. I don't think it would survive a fall.One major advantage of this thing over any of the other systems I've seen (and others have commented on) is that you can easily do inside and outside curves since there is only one pressure roller. All in all it is a good alternative to my wall-mart iron.

8 of 8 people found the following review helpful.
Excellent for small shop
By C. L. Moore
I have a small one man shop and love this bander. I have owned a Brandt 20k bander in the past, and while this doesn't do all the Brandt did it is very good for preglued banding. You can do many shapes because of its single roller and portability and straight edges. After using it for a while I find it very easy to adjust for different thickness materials. I made a stand for it that I mounted to the side of my bench. It is simply a shelf long enough for it with a 2 1/2" x 3/4" plywood rip mounted on edge in the middle. I place the bander on it like I am going to band the plywood. It holds it up and will keep it from being tipped over. I have applied thousands of feet of edgeband with it and find it very useful, much faster than most other ways. And, it takes up a lot less room than my Brandt did. There are a few negatives, you can't band anything less than about 4 1/2" without figuring another way to use it. I had a lot of narrow pieces to do for one job and mounted it sideways on a table by drilling two holes for the rods and shimming it up and locking it down. Then I made a sled for the pieces lined up to fit the opening. It worked great. I would highly recomend this bander for smaller shops and for people who can use preglued edging.

7 of 7 people found the following review helpful.
Great machine for the cost
By Mark Nagel
I have a small cabinet shop. Couldn't afford a used $5000 hot pot machine, so I tried one of these. It took about 30 minutes to adjust, probably coulnd have been 10 minute if I bought the 7/8" banding. But I got it right and man is this fast. 3/4" banding goes on perfectly straight. You can move this faster than you want, I use low power most of the time. I'd say you can do a 4 foot edge in 15 to 20 seconds. All in all a very good machine, not like the $20,000 power feed, trim shave models, but for a small shop more than adequate.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Compare US Forge Welding Flux Cored MIG Wire .035 10-Pound Spool #00074

Buy US Forge Welding Flux Cored MIG Wire .035 10-Pound Spool #00074

US Forge Welding Flux Cored MIG Wire .035 10-Pound Spool #00074 Product Description:

• Excellent for use with small constant current wire feeders which are lightweight
• Fabrication and repair of lightweight structural steel, trailers, tanks, hoppers and machinery parts
• Excellent for use on fillet and lap welds on thin gauge steel where burn through is a problem with other wires and electrodes
• Ideal to use in drafty or windy conditions where gas shielded wires cannot be used

Product Description

For gasless welding. With smooth, clean surface required for efficient wire feed. Minimal splatter, easy slag cleanup. Rental.

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
excellant flux core mig wire
By kevin
This wire I've used for 3 years now in my Lincoln SP-135T and continue to purchase it. It is excellant for welding thin automotive body work with out burning through. It has very low splatter and produces clean welds. I would recommend it to anyone because of the quality and value.

1 of 1 people found the following review helpful.
Mig Welding just about anything
By Jay
I use this to weld just about anything made out of steel.Works good and does the the job.This does what it is supposed to do.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Deals for Grizzly G7111 Heavy-Duty Red Wagon

Buy Grizzly G7111 Heavy-Duty Red Wagon

Grizzly G7111 Heavy-Duty Red Wagon Product Description:

Product Description

Not just for kids (although they'll appreciate it too), this heavy-duty wagon is great for hauling just about anything. Large pneumatic wheels with aggressive tread smooth out any terrain. Overall sizes is 40"L x 19 1/2"W x 15 1/4"H. Approximate shipping weight 29 lbs.

Customer Reviews

Most helpful customer reviews

12 of 13 people found the following review helpful.
Panther G7111 - Not exactly Heavy Duty
By B. Mckinney
With oversized inflated good tread wheels and a fairly large caring capacity you might expect this wagon to carry a load of cinder blocks with out balking. Unfortunately, if the load is over a 30-40 lb child the friction on the suspension builds up making it harder and harder to pull. It's a great wagon at a good price for pulling small children or light loads of their play things, but don't expect to use it to easily pull grampaw back to the house if he gets tuckered out pulling the kiddies around.

3 of 3 people found the following review helpful.
Does the Job
By L. Barclay
We bought the wagon to use in the garden, hauling supplies, plants, weeds, etc. It does the job and the oversized pneumatic wheels are nice on rougher ground. Not too hard to put together, although the instructions are vague and left me scratching my head a couple of times. And, the packet of bolts contained more types than the instructions listed. The extras were not needed, but did cause some of my confusion. Once assembled, it was exactly what I wanted.

3 of 3 people found the following review helpful.
Red Lightning!
By L. Pretorius
My Dad and my 1 yr old nephew have hours of fun on this. easy to assemble, easy to steer, and even my nephew drags the flyer all over the house. He only fell out once when my dad turned the corner a bit fast, but not serious at all. When he is ready for a ride, he fetches it and wheel it to my Dad. very easy. Highly recommendable.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!