For Sale Fluke Networks 19800009 TS19 Test Set with ABN

Buy Fluke Networks 19800009 TS19 Test Set with ABN

Fluke Networks 19800009 TS19 Test Set with ABN Product Description:

• Used by installers, repair technicians, and other authorized personnel for line testing and temporary communications
• Provides both DTMF (Touch Tone) and dial pulse output
• Angled bed-of-nails clips allow easy access to individual wires
• Last number redial, dual monitor impedance, an electronic ringer (on/off)
• Field replaceable line cords and belt clips

Product Description

19800-009 ButtsetHarris TS19 Test Set withAngled Bed-of-Nails Clips- DataSafe - High-Impedance Monitoring - Clip onto a line monitor mode without disrupting data traffic.- Safety clip on to monitor and trouble shoot phone lines- 18 month warranty- Polarity indication: to identify polarity of the line- Audible ringer for callbacks- Tone and Pulse operation- For use with puterized voice response system- Speech signal levels pensated for loop length - Last number redial- Hearing aid patible receiver- Replaceable heavy-duty braided line cord- Replaceable locking spring-loaded belt clipHC19800009

Customer Reviews

Most helpful customer reviews

11 of 12 people found the following review helpful.
Not Worth It
By An Educated Consumer
Disappointed with this product. Mode switches are cheap and flimsy. It's not rated for wet environments (i.e. outdoor use). This Fluke "test set" is barely different than a standard line powered slimline phone. The big deal is that it's one piece, has clip leads to connect to the phone line and a polarity LED. It costs $85. If you can deal with slight inconvenience you can buy a standard slimline phone for under $10 (right here on Amazon) and solder on test clips to the phone's input line. If you're even more technically savvy, you can solder an LED and resistor to get the polarity feature. So for about $15 you have the same diagnostic capability. I use Fluke meters all the time and the quality is generally first rate. This test set does not measure up.

0 of 0 people found the following review helpful.
Good, functional
By Anthony Straight
It works and is handier than a phone for field work. The volume from the speaker is pretty low. If you don't need the high-z feature or selectable pulse/tone dialing, and can stand a little inconvenience in the field, an ordinary Trimline (or eq.) phone is a lot cheaper.

0 of 0 people found the following review helpful.
It does the job
By Cliford Ehlers
I needed a test set to verify phone lines and communication communications for Fire and Security panels communications to a central station. This works great the last number redial is handy when verifying that the phone line you are on will reach the called number consistently. The bed of nails connections work well whne you cant get to a terminal to connect to.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Price Fluke Corporation 322 AC Clamp Meter

Buy Fluke Corporation 322 AC Clamp Meter

Fluke Corporation 322 AC Clamp Meter Product Description:

• Small, rugged clamp meter ideally suited for current measurements up to 400 A in tight cable compartments
• Offers accurate low current measurements, continuity test function and Fluke reliability
• Mid-size model; ergonomic grip; maximum jaw opening is 1-inch
• Includes color-coded heavy-duty test leads and batteries
• 5 by 8 by 6-inches; weighs 1.8 pounds shipped

Customer Reviews

Most helpful customer reviews

141 of 144 people found the following review helpful.
Similar product to FLUKE T5
By HMMWV
Seldom does a company make 2 products that do almost the exact same thing, but Fluke's low end ampclamp (the 322) is almost a duplicate of the high-end digital amp-probe (T5) Fluke T5-1000USA,Electic Tester 1000V,Continuity,. Here are the big differences.The 322 can handle BIG conductors and big currents (400A AC). The T5 maxes out somewhere around 3/0 copper wire and 100 A AC. The T5 has a bright red light to warn you when high voltages are present - the 322 warns you with an icon in the LCD display. The T5 comes in 600 and 1000 V versions, but the 322 is limited to 600 V.The 322 works like the traditional amp-clamp. The T5 is best described as an "amp-FORK" because the opening is permanent and doesn't need to be closed to make an accurate measurement. The T5 "FORK" will accept a 1/2" diameter conductor but nothing bigger. You just poke it over the wire and the AC current is measured when the wire gets to the bottom of the fork. Neither model makes DC current mesurements. Consider the 337 if you need DC current. Also look at the 333 - it is similar to the 322The T5 is smaller. about 1/2 the width. Both run for a long time on 2 AA batteries but the T5 runs twice as long. Using Lithium L91 AAs you can forget about batteries for a few years of everyday use.The T5's probes are PERMANENTLY attached to the meter so they never get "borrowed". This may seem trivial but if you work around other people probes seem to be able to walk. They stow nicely in clips built into the T5 case or you wrap them around the 322. One T5 clip even doubles as an extended probe holder on the so you can use one hand to hold the meter and probe with the same hand, keeping you even further from the live circuit. At 1000 V that's a nice feature. The probes are removable from the end of the cables on the T5 so that you can put a clip on one line instead. The 322 accepts a full range of test accessories subject to it's 1.5 Megohm input impedance which can upset thermometers, or especially high voltage probes.The T5 automatically switches AC or DC voltage depending on what it sees comming in and indicates it in the display as AC or DC. The 322 has a dial setting for AC or DC voltage and you must tell it which you want to measure. If you have a complex signal (AC+DC) ONLY the 322 can tell you about each part - the T5 will just pick one, usually the AC, unless the voltage is stable like from a battery or DC supply. Thus the T5 is somewhat ambiguous with combination DC/AC signals. These need a traditional DVM like the 179/279 series.The T5-1000 can go to 1000 volts AC / DC, but the 322 stops at 600V. The T5 measures to 1000 Ohms, the 322 stops at 400 Ohms. Both have continuity beepers. The 322 goes to .01A resolution, the T5 is .1AThose are the hard facts, here are some Personal Thoughts from using both:Neither the 322 or T5 are a replacement for the traditional bench DVM like the 179 or 279 but they can do ALOT of basic electrical measurements fast and easy. They are GREAT tools if you need to make current measurements quickly without disconnecting the conductor and also want to measure voltages and wire resistances. Input impedance of the meter is 1.5 Megohms instead of the typical 10 Megohms of a traditional DVM, so some accessories are not compatible with either of these. Both have a hold button - very helpful when you dig for a wire and once found you can't see the display - just press hold, get your meter back and read it later.I like the "fork" on the T5 - it's fast and gets into smaller spaces than a bigger clamp. If I were working on MCM series cables, the 322 would be the only choice though. I also got spoiled by the automatic DC/AC switching on the T5. Most of the time voltage measurements are not complex AC+DC and if they are you need a different meter anyways.I did alot of work on a high power 60Hz to 50Hz motor/generator set for testing foreign powered devices - I always used my T5-1000 when probing inside the motor/generator control panel live because I could clip one lead to ground and put the hot lead in the meter's extended holder then use it one handed to measure voltages with one hand behind my back. Since the generator had a DC field coil, the T5 would switch automatically when I measured the exciter DC voltage instead of the AC output which was one less switch to mess with. Setting up the generator was very simple using the T5.Summary: These two products are so close you need to evaluate the voltages, currents, and wire size you work with to pick one over the other. Beyond 100A or 1/2" diameter conductors you are automatically going to need the 322. Above 600V, The T5-1000 wins. *IF* you can use either, the T5 is a bit more convenient and fits the hand nicely. They are 2 different meters and have different personalities, but are priced close and duplicate alot of specifications making it a personal decision. I hope this info helps you pick the right one for your job. Either one is a quality product that will have a long service life. Oh yea, the T5 is spec'ed by fluke to survive a 10 foot drop - it is ruggedly built without an opening clamp mechanism.

24 of 26 people found the following review helpful.
A plumbers review
By Ryan C.
As a plumber who encounters electricity on occasion, especially with some relaxing of the electrical code, i want a tool I can trust and I know Fluke is a trusted name. This does what I need it to not any more and not any less. with some of my ignorance in electricity, however; i was under the impression that I would be able to use the clamp around say a line to a waterheater and i would be able to tell if it was still hot but i now know you can only clamp a single positive or negative wire because both together will cancel out and read zero.

15 of 16 people found the following review helpful.
perfect for my job
By Robert A. Ruiz
this is my second Fluke 322, my first being stolen on a job site, well thats construction. the 322 are rugged and very reliable, they are not True RMS, but for simple motor troubleshooting they are an affordable substitute. i've used the clamp on some pretty big 300 amp motors and have never had the glitch on me and have turned around and tested small voltages with no problems. its that kind of flexibilty i like about the fluke 322.

See all 32 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Price Fluke 179 ESFP True RMS Multimeter with Backlight and Temp

Buy Fluke 179 ESFP True RMS Multimeter with Backlight and Temp

Fluke 179 ESFP True RMS Multimeter with Backlight and Temp Product Description:

• 80BK Temperature Probe
• Installed 9V battery
• Test leads
• Users manual

Product Description

Setting the new multimeter standard The 179 Series is the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability. Features: True RMS voltage and current measurements 0.09% basic accuracy 6000 count resolution Digital display with analog bargraph and backlight Manual and automatic ranging Display Hold and Auto Hold Frequency and capacitance measurements Resistance, continuity and diode measurements Temperature measurements Min-max-average recording Smoothing mode allows filtering of rapidly changing inputs Easy battery exchange without opening the case Closed case calibration through front panel Ergonomic case with integrated protective holster EN61010-1 CAT III 1000V / CAT IV 600V Measures twice as fast as other multimeters Calibrated Specifications Voltage DC Accuracy*: ± (0.09%+2) Max. Resolution: 0.1 mV Maximum 1000 V Voltage AC Accuracy*: ± (1.0%+3) Max. Resolution: 0.1 mV Maximum: 1000 V Current DC Accuracy*: ± (1.0%+3) Max. Resolution: 0.01 mA Maximum: 10 A Current AC Accuracy*: ± (1.5%+3) Max. Resolution: 0.01 mA Maximum: 10 A Resistance Accuracy*: ± (0.9%+1) Max. Resolution: 0.1 Ω Maximum: 50 MΩ Capacitance Accuracy* ± (1.2%+2) Max. Resolution: 1 nF Maximum: 10,000 °F Frequency Accuracy*: ± (0.1%+1) Max. Resolution: 0.01 Hz Maximum: 100 kHz Temperature Accuracy* ± (1.0%+10) Max. Resolution: 0.1°C Range: -40°C/400°C *Note: Accuracies are best accuracies for each function Environmental Specifications Operating Temperature: -10°C to +50°C Storage Temperature: -30°C to +60°C Humidity (Without Condensation): 0% - 90% (0°C - 35°C) 0% - 70% (35°C -50°C) Safety Specifications Overvoltage category: EN 61010-1 to 1000 V CAT III. EN 61010-1 to 600 V CAT IV. Agency Approvals: UL, CSA, TUV listed and VDE Pending Mechanical & General Specifications

Customer Reviews

Most helpful customer reviews

35 of 35 people found the following review helpful.
Fluke 179 vs Fluke 87-5
By Networker
General comments:The Fluke 179 is an excellent meter and I've used it for serious electronics hobby work for a couple of years now including measuring very high AC / DC voltages and currents. It's extremely accurate, reliable, and has several functions (measurements) it can do very well. The ergonomic case design and the fact that the holster is integrated into the case design make it durable, compact, and easy to work with, this one thing is what the 179 has over the 87-5. When I first got the 179, the beeper went out, I contact Fluke, sent it back to them, they repaired it no charge and even calibrated it for free! So you have excellent support from Fluke with the lifetime warranty on this meter. Only thing is there is a few things the 179 cannot do that the more feature rich Fluke 87-5 can do, so I wish I would've spent the extra $30 and got the Fluke 87-5.Fluke 179 vs Fluke 87-5:Here are the main differences between the 2, in all other things the 2 meters are identical. Note how the 87-5 has more capability, in several cases you may need this capability, especially in the higher temp measurements, the relative (or 0 out the display) button, and the ability to measure micro-amps. These are the 3 main features I ended up needing the most on the 179 that the 87-5 has. Also there has been a few times where capturing the peak of an AC wave form (voltage or current) would've been nice to have rather than the Max function (which doesn't always capture the true peak). Fluke 87-5 vs. Fluke 179------------------------------------------------------------------------------Count 20,000 vs. 6000Basic accuracy .05% vs. .09%Capacitance 10pF vs. 1nF (1000pF)Micro Amps YES vs. NODuty Cycle YES vs. NORelative Reference Button YES vs. NOTemp Max 1994F (1090C) vs. 752F (400C)Motor Drive Measurement YES vs. NOPeak measurement function YES vs. NOConclusionAs with most other Fluke meters the 179 is an excellent meter, but just beware of it's limitations in relation to the 87-5. The 87-5 is only $30 more on Amazon here so if you think you'll need some of the added functionality, the the $30 would be well spent in my mind.

13 of 13 people found the following review helpful.
Fluke dmm,safty test leads, and 80bk thermo probe only
By Maria King
this is an excellent buy for the meter only, there are no extra's like the combo pack one's so for a first time buy, I would recommend one of the combo packs from $240 - $270. But if you already owned a fluke dmm and needed to replace it this is the perfect purchase.

16 of 17 people found the following review helpful.
Great meter-No case or hanging strap
By Ed
First, the bad. I find the ESFP (English, Spanish, French, Portuguese) acronym to be misleading. All this means is that the manual has ESFP instructions. Also, why is there the ability to measure Hz in the Vdc position (ha)? Lastly, Fluke should include a case and a hanging strap but they don't. Come on Fluke, what would this cost you...5 bucks (for 5 stars)?Now the good. Well made, durable...should last for many years. Super accurate...meter readings can be trusted. Ability to measure temperature...takes a while (5 minutes) to stabilize but a cool feature (ha). Ability to measure up to 100kHz...I use this feature a lot with laptops to see if the CCFL backlight inverter is working. I don't even have to make electrical contact...the leads of the 179 act as an antenna and pick up on the EMI field if the inverter is working. Note: Some CCFL data sheets I've seen spec 60kHz and most meters only go up to 50kHz, if that. Continuity test function very quick...will sense opens/shorts that are 250us or longer. Capacitance test function...no more trying to figure out the cap code.

See all 18 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where Can I Buy Fluke 177 True RMS Digital Multimeter with Backlight

Buy Fluke 177 True RMS Digital Multimeter with Backlight

Fluke 177 True RMS Digital Multimeter with Backlight Product Description:

• Manual and automatic ranging with display hold and auto hold
• Frequency and capacitance measurements; resistance, continuity and diode measurements; and temperature measurements
• Min-max-average recording
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster

Product Description

FLU177 Features: -True RMS voltage and current measurements.-0.09pct basic accuracy.-Digital display with analog bargraph and backlight.-Manual and automatic range.-True RMS Digital Multimeter. Specifications: -Frequency and capacitance measurements Other features include: display hold and auto hold, resistance, continuity and diode measurements, temperature measurements, min-max-average recording, smoothing mode allows filtering of rapidly changing inputs, easy battery exchange without opening the case, closed case calibration through front panel, ergonomic case with integrated protective holster, EN61010-1 CAT III 1000V / CAT IV 600V, measures twice as fast as other multimeters.. Warranty: -90 day warranty on material and workmanship.

Customer Reviews

Most helpful customer reviews

15 of 15 people found the following review helpful.
A fine tool
By J. Erdman
Just about as good as you as you can get for a digital multimeter. Fluke quality and durability (this unit is supplementing another Fluke 20+ year old model with a few less features), great accuracy, lifetime warranty, and easy and convenient to use (once you try out all the features a few times, everything will become easy and obvious).Of course, you may not need the accuracy that this model has, or true RMS for measuring AC, or some of the other features. If you just make an occassional voltage check, maybe a cheapy from Radio Shack will do the job. But if you make your living with electrical equipment or electronics, or you are a serious hobbyist, the features, usability, durability, and accuracy of this DMM make it worth getting. And the backlight feature has already proven itself useful, the first time I used it.

7 of 7 people found the following review helpful.
Great Meter
By Timothy S. Kirk
This is my second 177. Other than people walking away with the first one it's flawless.

4 of 4 people found the following review helpful.
Great general purpose meter
By David B. Bremer
While teaching a class for "first responders" who wished to enter the world of Amateur Radio, I needed a digital meter to use in my demonstrations. The acknowledged leader in digital meters is FLUKE, so why not give demonstrations with the best. This is a great general purpose meter with the added plus of being able to test capacitors as well as resistors and diodes. For all around use I found the easy to read LCD display, the ability to manually range the meter and the adjustable backlighting all very convienient. I would recomend this meter for new users as well as advanced technicians.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Low Cost Evergain Aerobic Exerciser 308 DL Chi Swing Machine

Buy Evergain Aerobic Exerciser 308 DL Chi Swing Machine

Evergain Aerobic Exerciser 308 DL Chi Swing Machine Product Description:

• Hands down, the best, most feature packed chi swing type massager available on the market today
• Equipped with second generation direct current high efficiency sealed ball bearing motor
• Multi-function chi massage device, featuring Far Infrared Ray Technology + Reflexology Foot Massager
• 1 Year Limited Manufacturer's Warranty, parts and labor included

Product Description

1. The gentle vibrating massage on the sole instantly revitalizes the tired legs. 2. Stimulation on precise vital points (convergent points of nerve endings) of sole promote a wide range of healing benefits via Reflexology. 3. Heat energy from the element stimulates tired cells and soothes the stress. 4. The soft, rubberized foot cradle gives extra comfort to the feet while in rocking motions. 5. The permanent magnets embedded in the soft foot cradle effect a magnetic therapy. 6. The Neck Massage function helps alleviate stiff neck muscles and promote neck flexibility. 7. The Shoulder Massage function from the expanded and stronger massage panel relieves stiff shoulder and pain. 8. The radiated energy from the FIR material on the massage panel invigorates cellular activities by way of its characterized physical "resonance", whether by Reflexology on the sole or by shoulder massage.

Customer Reviews

Most helpful customer reviews

24 of 24 people found the following review helpful.
Great Machine
By flyngrl
I did a lot of research and even bought another product first. The first one was more basic and did not have "you control" options-it just ran a program that I didn't like. It also rocked off the floor at higher settings. Beware and buy the best!Some have commented about the difficulty using the neck or back massager which requires your body to be elevated to match the machine. I use a firm foam step trainer. I place my upper back to hips on it and bend my knees so my feet are flat on the floor. This is very comfortable.The Evergain 308DL is the best machine. Why pay more? I also tried the one billed as the "orignal chi machine" (which costs twice as much) at a health practitioner's office and the Evergain is the same as far as smoothness of the action plus it has the foot/back massage option with far infrared and magnet technology. The extra middle notch for neck massage, along with the "neck" motion setting is unique to this machine.

13 of 13 people found the following review helpful.
Great for relaxing
By Gail Elieson
I have frequent headaches and low back problems. The Chi Machine works great to help keep my muscles in those areas relaxed. Variable speeds are a big plus. The only problem I've had to work out is when using the neck option. Due to the depth of the machine, you need to use pillows or something to get your body the level of the massage area. Once you've done that, it's wonderful!

20 of 22 people found the following review helpful.
Very Pleased!!
By KN
The Chi Evergain has made a remarkable difference in relieving the stiffness of my neck and shoulders. I am really impressed with the comfort of the neck cradle and can easily change the massage speed as needed. I am very pleased with the results I continually get from The Chi Evergain and have already recommended it to friends also dealing with neck and shoulder pain.

See all 21 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Reviews of Edsyn Soldering Station, 951SX Temperature Controlled

Buy Edsyn Soldering Station, 951SX Temperature Controlled

Edsyn Soldering Station, 951SX Temperature Controlled Product Description:

• Reliable and cost efficient
• Accurate linear temperature control
• Easy maintenance and calibration

Product Description

Reliable and cost efficient! Lead-Free Approved High reliability and cost efficiency make these stations ideal for the assembly line. Features: Accurate linear temperature control for consistent soldering Easy to maintain and calibrate Modular assembly of parts for ease-of-service Wide variety of soldering and SMT Crown tips available Includes: Soldering station and tip Tool pods Sponge holder with cleaning sponge, leveling pad and liner Low static computer aid Specifications Power requirements: 120V, 60Hz. Power rating: 15W - 220W Heater rating: 120V, 95W Temperature range: 400-800°F (205°-427°C) Temperature regulation: ±6°F (±3°C) Tip-to-ground voltage leakage/Resistance: <2V/<2 ohms Dimensions: 4.1"W x 8.2"H x 10"D (104mm W x 208mm H x 254mm D) Weight: 2.5lbs/1.1kg

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Great Iron for Pro or Experimenter
By R. Mikkelson
My old soldering iron's tip was too large to work on the tiny SMD (Surface Mount Device) parts. I asked the foreman at an assembly house that builds 1,000s of SMD electronic card products per month, and he told me his crew really likes the Edsyn 951SX. After using it for over a year, I can see why. The tips are much narrower then my old Weller iron and lets you solder separate .025" centered SMD pins with relative ease. The .050" centered pins are a cinch. The temperature control feature is useful when doing soldering to large and small leads/lands with different solder types, but requires some experimenting to obtain the best result. Edsyn offers a wide selection of interchangeable tips for this model, that change out and heat up in short order.

0 of 0 people found the following review helpful.
Simply the Best
By Julia Truchsess
I've purchased many Edsyn "Loner" stations for my company over the years and would not buy or use anything else. You simply cannot do better.

0 of 0 people found the following review helpful.
Awesome soldering station
By Terrance Parkhurst
I have been using Edsyn equipment for years. If I had a choice I would never use anything else. NASA used these in space once and maybe still does. The tips never wear out. Have only had one heater open up in all the years I have used them. Edsyn is very helpful if you phone them for advice. Parts are available for most Edsyn equipment. An Edsyn soldering station might last you for a lifetime. Maybe longer.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Affordable Dog Pet Food Container - Large

Buy Dog Pet Food Container - Large

Dog Pet Food Container - Large Product Description:

• Holds 40 Pounds of Dog Food
• Dog Food Sign Included
• Cedar Contruction
• Hinged Lid
• 20" Wide x 23" High x 10.5" Deep

Product Description

Our Half Barrels are a great way to store your animal feed. Dimensions are 20w x 23h x 10.5d

Customer Reviews

Most helpful customer reviews

16 of 17 people found the following review helpful.
I can't believe I found this again!!!!
By ~purplemoon~
We purchased the largest one 19 years ago (honest!) from LL Bean. We LOVE this barrel feeder! Over the last year or two, the wood towards the bottom is getting black and soft (from age/humidity, etc., I'm sure), so we are looking to replace it. We never use any type of trash bag liner, and yes, the crumbs accumulate at the bottom, but every once in a while we take the barrel, empty it completely, and let it air out in the sunshine on a nice day. Works like a charm! We love the fact that it sits flush against the wall. I believe if you go to that company's website directly, you have a variety of colors (wood stained) to choose from (a bit more money). We are extremely afraid of using plastic (of any type) to store our dog food (and human food!) due to the chemicals within the plastic. Contrary to what people might think, the dog food doesn't get stale in the barrel either. Highly recommend! Hopefully, if get another one, it will last another 19 years:~)EDTA ~ 01-02-12 ~ purchased this barrel for Christmas for the pups;-) ~ unfortunately, the quality is NOT the same as we raved about above (the one that was purchased 19 years ago). It is made relatively cheaply, sorry to say. The barrel does not sit flush on our floor, the lid is not flush with the barrel top either. The wood, although while it looks exactly the same, is somehow different. Thinner? Different wood? Not quite sure, but if it were metal, I would describe it as "tinny". It's lightweight. The sizing is a bit smaller as well ~ more narrow. All in all, it will do. I highly doubt this container will last as long as our first, original one:(

9 of 9 people found the following review helpful.
Great food bin
By G. Rand
This food bin fits our kitchen decor perfectly and holds a full bag of dog food (35 lbs?).Aside from our Lab eating the dog food sign 2 days after we set it up, we have had no problems with it. I added a simple hook and eye latch to the lid to keep him from opening it. I also added a piece of corrugated plastic to use as a liner holder, to keep the bag in place.As they suggest, you definitely need to use a trash bag or other liner to pour the food into. Otherwise, you will end up with bits of food and crumbs at the bottom of the bin, that are difficult to clean. With the liner, you just pull it out and replace it when you refill the bin.A great product. I would have rated it higher if it came with a latch and a system for holding the liner in place. But, I would purchase it again.

1 of 1 people found the following review helpful.
good storage
By remzi
The product was as expected. The online description was very accurate. It's nicely made.I use it to store a big bag of rice. I like that it looks cute and doesn't take up too much space.

See all 10 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!