Reviews Oldham 1005824 10-Inch 24T General Purpose Stacked Dado

Buy Oldham 1005824 10-Inch 24T General Purpose Stacked Dado

Oldham 1005824 10-Inch 24T General Purpose Stacked Dado Product Description:

• Precision-sharpened industrial-grade carbide tips for smooth clean cutting; dead-flat plate for straight, accurate cuts
• Anti-kick tooth design for added safety-reduces blade from climbing into workpiece
• Cuts smooth dadoes and grooves in these widths: 1/4-inch, 5/16-inch, 3/8-inch ,7/16-inch, 1/2-inch, 9/16-inch, 5/8-inch, 11/16-inch, 3/4-inch, 13/16-inch
• Used in wood, wood products and plastics, including soft-wood, hardwood, plywood, wood composites and melamine
• Fits most 8-inch, 9-inch, 10-inch, and 12-inch full-size table saws and radial arm saws with a 5/8-inch arbor;

Product Description

Precision-sharpened industrial-grade carbide tips for smooth clean cutting; dead-flat plate for straight, accurate cuts

Customer Reviews

Most helpful customer reviews

6 of 8 people found the following review helpful.
Good Service, Good Quality, Good Value
By BW Martin
Product was sent promptly. It cuts very nicely and has enough weight to smooth out the spin in my old Sears 10" contractor table saw. The plastic caddy provides excellent protection for the blades and for me. This was a good value purchase.

1 of 1 people found the following review helpful.
Quality dado set
By intermediate woodworker
I have used this dado several times, and it makes clean accurate dados. I would highly recommend this item and its reasonable cost makes it a great buy.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Affordable Grizzly G2535 Motor 1-1/2 HP Single-Phase 3450 RPM TEFC 110V/220V

Buy Grizzly G2535 Motor 1-1/2 HP Single-Phase 3450 RPM TEFC 110V/220V

Grizzly G2535 Motor 1-1/2 HP Single-Phase 3450 RPM TEFC 110V/220V Product Description:

Product Description

Made to demanding specifications, these motors feature the same quality as the motors we install in our heavy-duty machines. All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market. If you have applications where dust, oil chip or other foreign particles are the norm rather than the exception, you should use the Totally Enclosed Fan Cooled Motors (ENCLOSED). By popular demand, we have added the Open Drip Proof Motors (OPEN). These high quality motors are excellent replacement motors for use in relatively clean environments. Ideal for drill presses fan and bench machinery, all motors are dual voltage (110/220V) capacitor start. They feature standard NEMA 56 frames, all ball bearing construction, reversible rotation, 5/8" shafts, and are rated for continuous duty. Type: Enclosed, Size: 1 1/2 HP, RPM: 3450, Amps at 110V / 220V: 20 / 10AMPSRPM: 3450Size: 1-1/2 HPType: Enclosed

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Great Table Saw Motor
By MadtownGBP
Replaced the motor for my old craftsman 100. The old one was 3/4hp and got bogged down with hard woods (walnut). This motor with a good 24 tooth blade is great! I am using it a 3450 RPMs - I matched the pulley size on motor with the pully size on my blade arbor. I would not run any faster than that - you will get burns. The 1-1/2 HP is nice muscle to have for a contractor table saw. My old saw is 50 years old, but runs like brand new. Also, bought a Powertwist V-belt - now the old girl runs like a champ.

0 of 0 people found the following review helpful.
Strong motor
By HJS
My 30+ year old Craftsman table saw, advertised at the time, as 1HP and developing 3HP, has always bogged down on ripping thick material, especially with a smooth cut blade. I upgrade to this 1 1/2 HP Grizzly for a little more power. I tested the original motor ripping a 6 inch pressure treated board with a 80 tooth blade. It bogged completely down about 5 inches into the cut with mild to moderate feed. The Grizzly motor never slowed or labored with more rapid feed. The additional power is quite significant. The wiring diagram is on their website and is worth printing. The motor itself is well built and substantially heavier than my original. It was a great upgrade.

0 of 0 people found the following review helpful.
Easy to mount
By Merlin Perkins
This product is advertised as a replacement for my old Craftsman table saw motor, and they are correct! Had no trouble in mounting this motor on my Craftsman table saw. Has a lot more power than my old 1 horse. Doesn't slow down a bit going through some tough wood. Great value for the money, a " Best Buy".

See all 11 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Affordable Grizzly G2531 Motor 3/4 HP Single-Phase 3450 RPM TEFC 110V/220V

Buy Grizzly G2531 Motor 3/4 HP Single-Phase 3450 RPM TEFC 110V/220V

Grizzly G2531 Motor 3/4 HP Single-Phase 3450 RPM TEFC 110V/220V Product Description:

• AMPS
• RPM: 3450
• Size: 3/4 HP
• Type: Enclosed

Product Description

Made to demanding specifications, these motors offer the same quality as the motors we install on our heavy-duty machines. All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market. If you have applications where dust, oil, chips or other foreign particles are the norm rather than the exception, you should use these Totally Enclosed Fan Cooled Motors (Enclosed). Motors are dual voltage (110/220V) capacitor start. They feature standard NEMA 56 frames, all ball bearing construction, reversible rotation, 5/8" shafts, and are rated for continuous duty. Specifications: • Type: Enclosed • Size: 3/4 HP • RPM: 3450 • AMPS @ 110V/220V: 9.6A/4.8A • Reversible rotation Full 1 Year Warranty!

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Grizzly Motor
By A Customer
I recently purchased a Grizzly 3/4 HP single phase motor to replace the one on my 20 year old drill press. The slip on terminal cnnectiions on my drill press had to be changed to fit the screw eye connections on the motor. The motor has a keyed shaft while the OEM motor had a flat spot to accept the set screw. But all worked well and the installation was quick and easy. But I knew going into the replacement this was not an OEM replacement. Considering the price of the replacement OEM motor I would select the Grizzly again. Since this motor is totaly enclosed I expect it to be running long after I stop.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons of Grizzly G2530 Motor 3/4 HP Single-Phase 1725 RPM TEFC 110V/220V

Buy Grizzly G2530 Motor 3/4 HP Single-Phase 1725 RPM TEFC 110V/220V

Grizzly G2530 Motor 3/4 HP Single-Phase 1725 RPM TEFC 110V/220V Product Description:

Product Description

Made to demanding specifications, these motors feature the same quality as the motors we install in our heavy-duty machines. All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market. If you have applications where dust, oil chip or other foreign particles are the norm rather than the exception, you should use the Totally Enclosed Fan Cooled Motors (ENCLOSED). By popular demand, we have added the Open Drip Proof Motors (OPEN). These high quality motors are excellent replacement motors for use in relatively clean environments. Ideal for drill presses fan and bench machinery, all motors are dual voltage (110/220V) capacitor start. They feature standard NEMA 56 frames, all ball bearing construction, reversible rotation, 5/8" shafts, and are rated for continuous duty. Type: Enclosed, Size: 3/4 HP, RPM: 1725, Amps at 110V / 220V: 13 / 6.5AMPSRPM: 1725Size: 3/4 HPType: Enclosed

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Grizzley G2530 3/4 Single Phrase
By R. Roseman
I used this motor to replace a one horse power on a Central Equipment/Harbor Freight Drill Press. Motor hooked up with no problems and runs fine.

0 of 0 people found the following review helpful.
Perfect replacement
By Jay Valente
Used to replace burned out motor on my older Delta drill press. Plenty of torque, starts and runs strong, perfect fit. Will be buying the exact same one for my bandsaw.

0 of 0 people found the following review helpful.
Good Motor
By Steve
I am now back up and operating again thanks to this motor. Was able to install it on my drill press in just a few minutes and it works as advertised.

See all 7 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Affordable Robert Sorby H0506 Multi-Tip Hollowing Tool

Buy Robert Sorby H0506 Multi-Tip Hollowing Tool

Robert Sorby H0506 Multi-Tip Hollowing Tool Product Description:

Product Description

Combines a shear scraper with a hollowing tool and includes two double-ended HSS hollowing tips, HSS cutter, hex key and full instructions. Swivel tips can be set at any angle.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Great tool
By D. Pannell
I bought this item 11/07. I have used it for every hollow form i've made so far since the first time i used it. The square tip is great. Just press it directly into the center of the piece, gouge a small hole as long as the bit, and then catch about 1/8" or so of the side of the tip, on the top edge of that center hole, and just pull nice and easy to the desired wall wall thickness, removing more material and deepening the center hole as you go, till you get to the desired depth.It favors high speed and slightly high centerline to work at it's best.Then, to even up the "step pyramid" walls left by the square tip, you mount the round tip scraper, and working from the bottom of the inside,pull it very slowly up the inside wall, knocking off the edges and taking deeper cuts until it the desired thickness and texture. Then you can mount the big flat scraper and make light little shear cuts, evening out the whole thing.Very handy tool. But it only goes like 6" deep. You will need it's big brother, the Hollowmaster for more depth. It also has a curved neck for better reach, unlike this one. Overall, great tool, and I won't work the same without it. It is integral in most all of my turnings.The allen bolt holding the whole bit compression part on, will strip. watch it. it doesn't take much at all.

0 of 0 people found the following review helpful.
Great, easy to use tool
By Robert Bredlie
I've been using this tool for 4 months now and I love it. The hollowing tips make fast work of everything I have tried them on without the occasional grabs I get with a fingernail grind bowl gouge. And it is a LOT easier to sharpen.I also really like the ability to rotate the scraper tip to conform to different shapes. I liked this tool enough to buy a second one so I could keep the scraper tip on one and the hollowing tip on the other.

0 of 0 people found the following review helpful.
Great for bowl making
By E. Holmquist
I got this while struggling to make bowls where the rim is narrower than it's widest point using a conventional bowl gouge. I am not doing the narrow aperature hollow forms, just slightly narrower rims.I also found that the rotating scraper let me avoid having to buy a bunch of scrapers. I still use my heavy duty outboard scraper on bowls, but for my less common scraping tasks, I avoided having to buy tools that I would only use occasionally.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Get Cheap Grizzly G9983 15" Wide-Belt Sander (Open End)

Buy Grizzly G9983 15" Wide-Belt Sander (Open End)

Grizzly G9983 15" Wide-Belt Sander (Open End) Product Description:

Customer Reviews

Most helpful customer reviews

31 of 32 people found the following review helpful.
Great Machine -- but...
By C. Schroeder
My machine arrived last week.1. This is a large heavy (800+ lbs} machine. It comes on a large wooden pallet. I needed to cut down the pallet to even get the machine thru my shop door on a pallet jack and needed to do a fair amount of cribbing with an auxilliary jack to remove the machine from the pallet.2. There were 2 problems when I got into the machine -- the motor mount shaft had lost a bolt/washer (in the farthest inaccessible corner of the cabinet) and it took an hour + to get the motor back mounted correctly. Also, a set screw was loose on the top belt roller bracket -- which led to it being ejected the first time I turned on the belt tensioner switch. It was simple to put it back in place and tighten the set screw.3. The instructions DO NOT tell you the machine has continuous air bleedoff when you run it. The air noise is normal -- do not adjust to stop the noise -- or you will have more work to re-adjust!4. The instructions DO NOT caution you to be careful when installing the sanding belts to make sure they are INSIDE the air oscillation horseshoe -- I lost 2 belts before I figured out what was happening.5. The 5 hp motor DOES really require 35 amps each line 220v, even though my Delta Dnisaw 5 hp motor only needs 20 amps 220v.6. The machine itself is 5 star quality. Belt changes are really about 30 seconds -- giving substantial time savings over any of the sanders requiring you to cut and roll sandpaper on the rollers to change grits. The platen arrangement allows the actual sanding surface to be only the 2 bottom drums for coarse sanding, the 2 bottom drums and the platen, or just the platen for fine finishing. I have found top quality Klingspor sanding belts available to fit this machine.7. The manual is available on the Grizzly website so you can review in advance to learn more. Other than as noted above, the manual is very detailed and provides great pictures and descriptions.

2 of 2 people found the following review helpful.
Great machine
By J. Gerving
I just purchased this machine used and wow what a machine! It is hefty and hard to move around so where you put it plan on it not moving.To get this machine into my shop I took the entire top apart and moved it in pieces due to the weight.Reassembly was a snap and I have used it many times already. The belt replacements is the easiest I have seen.I have this tied into a 30 amp 220 circuit and have not had the amp gauge above 25 yet. I prefer to make a few extra passes than try to do it all at once. The time this saves sanding glue up panels is amazing. As above you can change the belts in a minute or less. The platen versus drum surface sanding is a great option. You can remove a decent amount and then back off on the higher grits to get a smooth surface that you don't have to do anything else to.Would definetly recommend this to anyone, that goes to say with all of Grizzly's products. They are a class act of a company with excellent customer service.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale Grizzly G9980 51" Wide-Belt Sander, 3-Phase

Buy Grizzly G9980 51" Wide-Belt Sander, 3-Phase

Grizzly G9980 51" Wide-Belt Sander, 3-Phase Product Description:

Product Description

When your sanding needs fall under the category of production level, look no further than Grizzly for your wide belt sander. Manufactured for the industrial user, this machine features state-of-the-art electronics, precisely engineered components and innovative design and construction. Whether you need to sand a silky smooth finish on a highly figured tabletop, dimension rough lumber or simply run panels all day long, these sanders will make light work of the toughest jobs. Specifications: • Sanding belt motor: 30 HP • Voltage/Phase: 230/460V*, 3-phase • Belt feed motor: 2 HP • Table elevation motor: 1/4 HP • Pressure roller type: Rubber • Infeed drum: Spiral Grooved Rubber • Outfeed drum: Steel • Belt roller diameter (each): 4" • Platen: Micro Adjustable Graphite/Felt • Sanding belt size: 51" x 60" • Maximum board dimensions: 51"W x 6"H • Minimum board length: 14" • Conveyor speeds: Variable, 14-60 FPM • Air requirement: 57 - 75 PSI, 7 CFM • Surface speed of drums 2200 FPM • Approximate shipping weight: 2731 lbs. *Prewired for 230V. If you require 460V operation, Grizzly must convert your machine at the time of purchase to maintain the machine's warranty. A $250 non-refundable fee will be added to your order. Please allow extra shipping time for the conversion. If you need more information, please contact technical service.

Customer Reviews

Most helpful customer reviews

2 of 6 people found the following review helpful.
When fine sanding's a must...
By G. Coughlin
This is the best in the biz. The missus and I used to run a little taxidermy shop down in Coos Bay. When customers couldn't pay, which happens more often than you'd think even when a loved pet is involved, we'd fashion lamps or tables or knick knacks out of them. The problem is no one wants a curio table that's a gonna shed all over the place. So we'd fine sand the hair down to bristle length. Took us FOREVER to fine a sander with variable speed that went low enough so as not to pull the hairs out by the follicle. But this little beauty here did the trick. First attracted to it by its name, we've come to find it irreplaceable. Whether it's a barking dog umbrella holder or moose knuckle pendulum klick klack balls, this is definitely the sander of choice for the artisan who works in organics.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!