Buy VAPOR DETECTION SENSORVAPOR DETECTION SENSOR Product Description:
- , FIRMS2
Product Description
MS-2 Gasonline and Propane Sensor
Replaces MS-1 and PS-1 sensors
Color-coded RED with a quick-disconnect 12-inch lead that connects to a standard 20-foot sensor cable for use with M-1, MB-1, M-2A, S-1, S-1A and S-2A fume detectors.
Plug-in connectors eliminate wire routing during installation or sensor replacement.
Available in red.
Gasoline & propane sensor with 12" lead and 20' sensor cable
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
Makes a bad unit work again
By Christopher Bruno
These sensors are prone to permanent damage if they are splashed with hydrocarbons, which was the case with mine. The mounting location should be carefully considered and the directions followed to prevent needing a replacement sensor. In most applications the sensor can be mounted considerably above the hull bottom (at starter level) which gives a cushion to avoid sensor contamination. Mine was mounted too low and dead center in the bilge, rather than along the side, which made it very susceptible to contamination.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
